Scarecrow products are non toxic and safe to use on teeth.
Safety tips on Fangs & Tooth Cap:
Designed for temporary use only. NOT to be used over caps, crowns, dentures or braces. Do not use on irritated or sensitive gums or if gums are still sore after a dental cleaning. Do not eat or sleep with fangs on. Do not drink red drinks like fruit punch or red wine to avoid your fangs from getting dyed to pink. Remember not to smoke while customizing and not to customize near open flame. Keep out of reach of children.
Application & Removal Tips
How To Customize Your Fang
Step 1: Identify proper alignment with your tooth by modeling the fang against it.
Step 2: Pour out the contents of one capsule into the mixing vessel. Gently tap to push all the powder to one side.
Step 3: Add five drops of customizing fluid to the powder.
Step 4: Stir well to make a paste.
Step 5: Fill one fang cap with this paste.
Step 6: Place it on one tooth and hold for five minutes without any wiggling.
Bucky Teeth Cap
How to customize Bucky Teeth Cap
Step 1: Twist the two capsules of powder apart and tap and pinch each side of the capsule to the corner of the large compartment of the plastic blister of the packaging.
Step 2: Tilt the blister so that all the powder moves to one corner.
Step 3: Snap the liquid bottle tip off and add 10 drops to the powder.
Step 4: Stir using a knife tip or toothpick for a minute and then wait for another minute allowing the mixture to form a thick paste.
Step 5: Scoop the paste into the bucky cap and place onto your front teeth and move it around to adjust its position.
Step 6: Hold without wiggling for three minutes.
Step 7: Take the cap off after ten minutes. It might feel really secured, so push out gently with your bottom row of teeth until you hear a gentle click. Then wiggle the cap out from the top using your fingers.
Step 8: Use scissors or nail clipper to trim any extra material from the edges.
Step 9: Once the cap is properly molded, it can be slid in and out and reused hundreds of times.
Click for more instructions...
Teeth & Blood Kit
How Do I Apply
Step 2: Twist and snap to open teeth paint bottles.
Step 3: Add a few drops of each color into the plastic bubble that is part of the kit packaging.
Step 4: Dry your teeth well with paper towel. Keep lips open and dry.
Step 5: Using an application brush, paint either color on spaces between teeth and then spread across teeth.
Step 6: Repeat alternating colors and build up until your reach your desired color look.
Step 7: Allow the paint to dry completely by keeping the mouth open for additional 30-60 seconds.
Step 8: Using a pin, puncture lip capsule and squeeze around lips and teeth.
Step 9: Optionally paint finger nails with teeth paint.
How Do I Remove
Remove using tooth brush and paste. Alternatively wipe off using rubbing alcohol on a tissue. Rinse with water.
Learn more about Scarecrow
Scarecrow owners have been in the business of outfitting vampires since 1990. The company is a leading manufacturer of custom fangs that are easy to customize and then reused multiple times. Scarecrow has been a preferred brand in entertainment industry and Halloween market.